SizeGenetics: AndroMedical device

[knicks]

hi guys, i was lucky enough to have been picked to receive the SizeGenetics.

It came with the AndroMedical stretcher, 2 bottles of ProSolutions pills, and 1 bottle of Volume pills.

I got a question though, which way does the AndroTop goes?(spongy part that goes around the base of the cockhead) The rubbery side? or the sponge side?

[Edward]

:) Greetings knicks - The rubbery side faces down on the shaft behind the gland.

[knicks]

thanks Edward
you're the guy with all the answers :)

a problem, when i do that, the rubbery part will slowly turn itself outwards.

[quietstorm01]

Had the same problem and now i wear it rubber side out. i actually think that is how you are supposed to wear it as the rubber provides a out structure to hold shape when wearing the ADS. It's much more comfortable this way too.:D

[turtle]

quietstom
I won't argue with you that the foam side is more comfortable, but I agree with Edward that I think the rubber side goes down. Why? It provides more grip and protects against slippage. That is why the instructions suggest some type of a protective wrap. Also the reason why I came up with the newborn footie stocking. You need a little protection from irritation if you wear the rubber side down
turtle

[quietstorm01]

Thanks Turtle,

What ever works right? lol I really like your suggestion with the baby socks, I'm gonna have to try that. I'm currently using two soft cotton face pads (the one's used for cosmetics) along with a folded tissue to wrap around it and keep it in place. May sound like alot but I now finally have great comfort and i'm able to have a fresh set of comfort daily. Thanks for the tips. :D

[WiseGuy25]

Hey all... this is my first post here, this forum is really great and the support and answers you guys provide gives peace of mine that we're not doing this on our own. I've been lurking for a few days since i felt i didn't have much to add because i only joined 3 days ago.. BUT i've been using the andro device for 2 weeks and yeah i've been having problems of discomfort with the glands and the silicon band i'm using some gauze.. but still it's not that comfortable...

I think the idea of the baby socks is excellent =D but.. where have u bought urs? I mean i can't seem to find any that has lycra in them..

[turtle]

Wiseguy25
I bought mine at a Target. All you need is a store that carries baby supplies and stuff. I suggested the lycra because that is a stretch material and should provide a good fit for different sizes. The socks that I bought contained lycra, but the more important thing is to get cotton socks. That will give you the comfort and protection.
turtle

[WiseGuy25]

Thanks for the quick response turtle =D i'll be off to mothercare asap lol =D.

[mkupo112]

Need some help fellas... I have worn the Andro-Device, and even though its extremely uncomforable I try to hold out 9 hours a day, every 2 hour breaks... but i am experiancing slight swelling on one side of the glad/head... and i think i might be wearing it too tight... however, if i try to loosen it up a bit... my penis slips out... it takes about 5 min or so.. but it slips out.. i was wondering if any one knows of a remedy for bruising or swelling..

Also, can someone kinda of walk me thru their personal experiance on trying to wear the device... i find the book a lil vague.. i get lost where it states to push down the device and witth the other hand try to pull the penis thru the loop and then tighten... the only way i have been able to do this is if my penis is hard enough to stay within the loop... other wise if too flaccid i have to pull my penis thru the loop and hold it ( stectching ) .. while trying to keep the device pushed back AND trying to tighten the loop with the few fingers i have available... i dont think its meant to be this hard, so i know i am doing something wrong.. but like is said.. only when i am hard am i not having this issue, but am i supposed to be hard? or soft ( 80% hard or lil less ).? Im sure i have confused some folks... sorry.. but if anyone understands or needs me to clarify i can... thanks either way !!!

Start STATS: (10/01/04)

EL: 5'' 1/2
EG: 4" 1/2

Current STAT: (11/21/04)

EL: 5" 3/8
EG: 4" 1/2

Not too much gains... but then again, i think i am wearing it wrong.. and tips would be appreciated...!!

[turtle]

I agree with you the example in the book doesn't read very clearly. I also agree with you that trying put the thing on in a flacid state is nuts. Keep it simple. Get reasonably erect and then set up the device. It won't take very long for the erection to become flacid and then the device is doing its job.
turtle

[mkupo112]

Hey thanks turtle! It is nuts to be flaccid, and yes, if you do attach the device while erect, in about 10 minutes tops erection goes away and then its doing its job...

BUT ( i hate that word )... one thing i noticed is when you are erect you end up trapping MORE blood in the glands which i think is the reason why i got an internal bruise.. but the reason i overtighten is due to the fact that im 4.5" erect girth... and when flaccid it looses almost 2 inches... meaning that if i dont tighten hard enough to compensate for the loss of 2 inches after losing erect, my penis will just slip out.

I also read your post on the baby socks... really good turtle. Does that also help with slippage? ;)

Thanks for any feedback...

[turtle]

Originally posted by mkupo112
I also read your post on the baby socks... really good turtle. Does that also help with slippage? ;)

Thanks for any feedback...

If it is more comfortable using the baby socks, then you can keep the loop reasonably snug. Obviously that will help a lot with slippage.
turtle

[dricke]

mkupo112,
I had similar problems with the device that you are experiencing. My solutions are a little different from the advice you have received so far. I am a little nervous about covering the glans with the sock as I like to be able to see the color and check to see if it is cold. I do cover my dick and the entire device with a nice soft sock to help keep everything warm. It can be removed to check without taking off the device. I could never get the device on soft and it is difficult to get it on quick enough when I am hard as it won't stay hard when I am working on installing the device. My solution is to attach the plastic part with the silicone loop using the adhesive gauze, you know the kind that sticks only to itself. Then I stretch it out and secure it to the rods on each side, one side at a time. In order to do this it was necessary for me to have the plastic piece modified. If you look at the photo I posted in the newbie forum under "Soreness of the glans", you can see the gauze and how part of the side of the plastic holding the head with the silicone loop has been removed. Also note that I am able to extend the rods by about one inch after the device has been attached by turning the adjustment knobs near the base of the device. This allows me to control the amount of force in the stretch. For me, I don't have enough hands to attach the device and cannot endure it's use without the gauze. Now you have more information with which to experiment and find the best way for you. Although I am new I am encouraged with this program as the guys are very helpful and my dick already looks and feels healthier. Keep up the good work.
dricke

[mkupo112]

Hey thanks guys for all your insight. I will have to check out the photos on that modified andro head piece. Last night, I accidently bumped into a new tactic to get the device on without being hard.

Its a two-step process... I get a pretty hard erection, not max though... and put the device on... I let the penis slowly start to soften up and lose erection... then i loosen up the silicone loop just a little and pull the skin down ( im not circumcized ) with one hand to make sure no folds of skin are trapped, while pushing the device down with my palm at the same time with that same hand.

Then pull the head up just slightly with my other hand a lil more enough to get the whole head above the cushion, so that ALL the rubbery part grab slightly below the gland. Then re-tighten the loop. I have yet to get another slip-out..

Either way, im off to target or SUPER-WALMART to get my baby socks... i noticed that when i do PE I sometimes have to use toilet paper to grab the glands to prevent slippage... im guessing that a sock will do the same thing.

Well thats just another tip, for anyone with the ANDRO-DEVICE, it might help, at least it works for me. Thanks guys for feedback!!

[soccer8517]

with the andro device their is the white base piece..on one side is the slim u shaped half while the other is like a half circle..now i am still not sure..but does the slim v-shaped half of the white piece go beneath the penis or is the v-shape part supposed to be above the penis..please anwaser thanks[/B]!

[dricke]

soccer8517
Here's my opinion: Your dick is made up of three cylinders, two large on top and one smaller on the bottom. A cross section at the base would be smoothly curved on the top with a little bulge on the bottom. I think the opening in the base of the AM device is shaped the same way so when tension is applied the force will be spread out evenly against your body. How does that sound?
dricke

[soccer8517]

look okay the base of the andro has a v-shap on one half and a half circle half on the other..wich on goes where..i dont need to know those things i already know..i just want to know how the heck to wear it! thanks!